Mechanical Engineering Faculty Research
Submissions from 2011
A Microfluidic Multichannel Resistive Pulse Sensor Using Frequency Division Multiplexing for High Throughput Counting of Micro Particles, Ashish V. Jagtiani, Joan Carletta, and Jiang Zhe
An Impedimetric Approach for Accurate Particle Sizing using a Micro Coulter Counter, Ashish V. Jagtiani, Joan Carletta, and Jiang Zhe
A Multiplexed Microfluidic Impedance Sensor for High Throughput Analysis of Microparticles, Ashish V. Jagtiani and Jiang Zhe
Enabling and Understanding Failure of Engineering Structures Using the Technique of Cohesive Elements, H. Jiang, Xiaosheng Gao, and T. S. Srivatsan
The Extrinsic Influence of Tool Plunge Depth on Friction Stir Welding of an Aluminum Alloy, K. Kandasamy, Satish V. Kailis, and Tirumalai S. Srivatsan
The Role of Tool Design in Influencing the Mechanism for the Formation of Friction Stir Welds in Aluminum Alloy 7020, K. Kumar and S. V. Kailas
Influence of Carbon Nanotubes and Processing on Cyclic Fatigue and Final Fracture Behavior of a Magnesium Alloy, Alan K.T. Lau, Tirumalai S. Srivatsan, Debes Bhattacharyya, Ming Qiu Zhang, and Mabel M. P. Ho
Dislocation Pinning Effects Induced by Nano-precipitates During Warm Laser Shock Peening: Dislocation Dynamic Simulation and Experiments, Yiliang Liao, Chang Ye, Huang Gao, Bong Joong Kim, Sergey Suslov, Eric A. Stach, and Gary J. Cheng
Association of Genetic Polymorphisms with Immunohistochemical Expression of Thyroid Transcription Factor 1 (TTF1) in Asian NSCLC Adenocarcinoma Patients, Wan-Teck Lim, Onkar Singh, Edwin Sandaranaj, Ajay Mohan Mahajan, and Eng Huat Tan
Prioritising Usability Considerations on B2C Websites, Chen Ling and Gavriel Salvendy
Prioritising usability considerations on B2C websites, Chen Ling Dr. and Gavriel Salvendy
Atomic Friction Modulation on the Reconstructed Au(111) Surface, Qunyang Li, Yalin Dong, Ashlie Martini, and Robert W. Carpick
Atomic Friction Modulation on the Reconstructed Au(111) Surface, Qunyang Li, Yalin Dong, Ashlie Martini, and Robert W. Carpick
Speed Dependence of Atomic Stick-Slip Friction in Optimally Matched Experiments and Molecular Dynamics Simulations, Qunyang Li, Yalin Dong, Danny Perez, Ashlie Martini, and Robert W. Carpick
Speed Dependence of Atomic Stick-Slip Friction in Optimally Matched Experiments and Molecular Dynamics Simulations, Qunyang Li, Yalin Dong, Danny Perez, Ashlie Martini, and Robert W. Carpick
A Constitutive Equation for Filled Rubber under Cyclic Loading, Min Liu and Michelle S. Hoo Fatt
A Coupled Simulation of Spinal Cord Blood Flow and Cerebrospinal Fluid Motion in the Spinal Subarachnoid Space Based on In Vivo Measurements, Bryn A. Martin, Philippe Reymond, Olivier Baledent, Jan Novy, and Nikos Stergiopulos
A Numerical Assessment of the Novel Concept of Crevice Containment in a Rapid Compression Machine, Gaurav Mittal, Mandhapati Raju, and Anil Bhari
Influence of Diamond-like Carbon Coatings on the Fatigue Behavior of Spinal Implant Rod, Yicheng Peter Pan, Jarlen Don, Tsuchin Philip Chu, and Ajay Mohan Mahajan
On the Use of Gas Metal Arc Welding for Manufacturing Beams of Commercially Pure Titanium and a Titanium Alloy, Anil Patnaik, Narendra Poondla, Udaykar Bathini, and Tirumalai S. Srivatsan
The Fatigue Behavior of Built-Up Welded Beams of Commercially Pure Titanium, Anil Patnaik, Narendra Poondla, Udaykar Poondla, and Tirumalai S. Srivatsan
Effects of Particle's Off-Axis Position, Shape, Orientation and Entry Position on Resistance Changes of Micro Coulter Counting Devices, Zhenpeng Qin, Jiang Zhe, and Guo-Xiang Wang
Effect of Tool Angle on Friction Stir Welding of Aluminum Alloy 5052: Role of Sheet Thickness, P. Jayachandra Reddy, Satish V. Kailas, and Tirumalai S. Srivatsan
Numerical Methods for Improved Efficiency in Macrosegregation Modeling, Udaya K. Sajja, Sergio D. Felicelli, and Juan C. Heinrich
Material Retrieval Device and Method of Using, Bradley F. Schwartz, Ajay Mohan Mahajan, and Jarlen Don
Cerebrospinal Fluid Hydrodynamics in Type I Chiari Malformation, Nicholas Shaffer, Bryn A. Martin, and Francis Loth
Development of Bamboo‐derived Sorbents for Mercury Removal in Gas Phase, Naved Siddiqui, Jarlen Don, Kanchan Mondal, and Ajay Mahajan
Users' Attitude and Strategies in Information Management With Multiple Computers, Guangfeng Song and Chen Ling
The Tensile Response and Fracture Behavior of Four High Strength Specialty Steels, Tirumalai S. Srivatsan, Kannan Manigandan, and T. Quick
A Comparison between Single and Dual Monitor Productivity and the Effects of Window Management Styles on Performance, Alex Stegman, Chen Ling, and Randa L. Shehab
Stitch Fiber Comparison for Improvement of Interlaminar Fracture Toughness in Stitched Composites, Kwek Tze Tan, N. Watanabe, and Y. Iwahori
X-Ray Radiography and Micro-Computed Tomography Examination of Damage Characteristics in Stitched Composites Subjected to Impact Loading, Kwek Tze Tan, N. Watanabe, and Y. Iwahori
Influence of Stitch Density and Stitch Thread Thickness on Compression After Impact Strength of Stitched Composites, Kwek Tze Tan, N. Watanabe, Y. Iwahori, and T. Ishikawa
Progressive Damage in Stitched Composites under Impact Loading, Kwek Tze Tan, N. Watanabe, A. Yoshimura, Y. Iwahori, and T. Ishikawa
Double Core Biopsy Instrumentation Kit, Thomas Tarter, Julie Tarter, Ajay Mahajan, Bradley Schwartz, and Tsuchin Chu
The Influence of Processing on Microstructural Development, Tensile Response and Fracture Behavior of Aluminum Alloy 5083, Troy D. Topping, Ying Li, E. J. Lavernia, Kannan Manigandan, and T. S. Srivatsan
Effect of Molecular Structure on Liquid Slip, Ajay Vadakkepatt, Yalin Dong, Seth Lichter, and Ashlie Martini
Effect of Molecular Structure on Liquid Slip, Ajay Vadakkepatt, Yalin Dong, Seth Lichter, and Ashlie Martini
Impact of Aortic Grafts on Hemodynamics: A 1D Computational Assessment, O. Vardoulis, E. Coppens, Bryn A. Martin, P. Reymond, and N. Stergiopulos
Assessment of Aortic Graft Impact on Hemodynamics, Orestis Vardoulis, Bryn A. Martin, Philippe Reymond, and Nikos Stergiopulos
Recent Advances in Particle and Droplet Manipulation for Lab-on-a-chip Devices Based on Surface Acoustic Wave, Zhuochen Wang and Jiang Zhe
Electrospun Microtubes and Nanotubes Containing Rheological Fluid, Shing Chung Josh Wong
Mechanical Deformation and Adhesion of Electrospun Polymer Fibers, Shing Chung Josh Wong, Haining Na, Shane Hague, Pei Chen, and Quiang Shi
Controlled Nanocrystallization of NiTi Shape Memory Alloy by Laser Shock Peening, Chang Ye and Gary J. Cheng
Bimodal Nanocrystallization of NiTi Shape Memory Alloy by Laser Shock Peening and Post-deformation Annealing, Chang Ye, Sergey Suslov, Xueling Fei, and Gary J. Cheng
Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening, Chang Ye, Sergey Suslov, Bong Joong Kim, Eric A. Stach, and Gary J. Cheng
Fatigue Performance Improvement in AISI 4140 Steel by Dynamic Strain Aging and Dynamic Precipitation During Warm Laser Shock Peening, Chang Ye, Sergey Suslov, Bong Joong Kim, Eric A. Stach, and Gary J. Cheng
Microstructure and Mechanical Properties of Copper Subjected to Cryogenic Laser Shock Peening, Chang Ye, Sergey Suslov, Dong Lin, Yiliang Liao, Xueling Fei, and Gary J. Cheng
Quantitative Comparison of 4D MRI Flow Measurements to 3D Computational Fluid Dynamics Simulation of Cerebrospinal Fluid Movement in the Spinal Subarachnoid Space, Theresia I. Yiallourou, Leonie Asboth, J. Kroeger, David Maintz, A. C. Bunck, Nikolaos Stergiopulos, and Bryn A. Martin
Laser Engineered Multilayer Coating of Biphasic Calcium Phosphate/Titanium Nanocomposite on Metal Substrates, Martin Yi Zhang, Chang Ye, Uriel Joseph Erasuin, Toan Huynh, Chengzhi Cai, and Gary J. Cheng
On the Use of Arc Radiation to Detect the Quality of Gas Metal Arc Welds, Li Zhiyong, Tirumalai S. Srivatsan, Zhao Hongzhi, and Yan Xiaocheng
Submissions from 2010
The fracture behavior of an Al–Mg–Si alloy during cyclic fatigue, Diya Azzam, Craig C. Menzemer, and Tirumalai S. Srivatsan
Electrospinning of Polymer Nanofibers: Effects on Oriented Morphology, Structures and Tensile Properties, Avinash Baji, Yiu-Wing Mai, Shing Chung Josh Wong, Mojtaba Abhati, and Pei Chen
Mechanical Behavior of Self-Assembled Carbon Nanotube Reinforced Nylon 6,6 Fibers”, Avinash Baji, Yiu-Wing Mai, Shing Chung Josh Wong, Mojtaba Abhati, and Xusheng Du
The Cyclic Fatigue and Final Fracture Behavior of a Titanium Alloy Taken from Weldments: Influence of Load Ratio and Orientation, Udaykar Bathini, Tirumalai S. Srivatsan, Anil Patnaik, C. c. Menzemer, and T. Quick
Mechanisms Governing Fatigue, Damage, and Fracture of Commercially Pure Titanium for Viable Aerospace Applications, Udaykar Bathini, Tirumalai S. Srivatsan, Anil Patnaik, and Craig C. Menzemer
A Study of the Tensile Deformation and Fracture Behavior of Commercially Pure Titanium and Titanium Alloy: Influence of Orientation and Microstructure, Udaykar Bathini, Tirumalai S. Srivatsan, Anil Patnaik, and T. Quick
Experiment, Thermal Simulation, and Characterizations on Transmission Laser Coating of Hydroxyapatite on Metal Implant, Gary J. Cheng and Chang Ye
Strain-Controlled Fatigue Life and Modeling of Conduit Polymers, Pei Chen and Shing Chung Josh Wong
Piezoresistive Behavior of Polymers Filled by Carbonaceous Nanoinclusions, P. Chen and Shing Chung Josh Wong
DMD-based 3D Micro-manufacturing, Jae-Won Choi, Michael D. Irwin, and Ryan B. Wicker
Multi-Material Microstereolithography, Jae-Won Choi, Eric MacDonald, and Ryan Wicker
Combined Micro and Macro Additive Manufacturing of a Swirling Flow Coaxial Phacoemulsifier Sleeve with Internal Micro-Vanes, Jae-Won Choi, Masaki Yamashita, Jun Sakakibara, Yuichi Kaji, Tetsuro Oshika, and Ryan B. Wicker
Real-Time Monitoring of Wear Debris in Lubrication Oil Using a Microfluidic Inductive Coulter Counting Device, Li Du, Jiang Zhe, Joan Carletta, Robert Veillette, and Fred K. Choy
Inductive Coulter Counting: Detection and Differentiation of Metal Wear Particles in Lubricant, Li Du, Jiang Zhe, and Robert J. Veillette
Conceptual Design of a Novel Ammonia-Fuelled Portable Solid Oxide Fuel Cell System, Siamak Farhad and Feridun Hamdullahpur
Performance Evaluation of Different Configurations of Biogas-Fuelled SOFC Micro-CHP Systems for Residential Applications, Siamak Farhad, Feridun Hamdullahpur, and Yeong Yoo
Effects of Fuel Processing Methods on Industrial Scale Biogas-Fuelled Solid Oxide Fuel Cell System for Operating in Wastewater Treatment Plants, Siamak Farhad, Yeong Yoo, and Feridun Hamdullahpur
Fracture Assessment of Ferritic Steel Components Under Dynamic Loading, Xiaosheng Gao
A Study on the Effect of the Lode Parameter on Ductile Fracture, Xiaosheng Gao, Guihua Zhang, and Charles Roe
A Study on the Effect of the Stress State on Ductile Fracture, Xiaosheng Gao, Guihua Zhang, and Charles Roe
Engineering a Dynamic Science Learning Environment for K-12 Teachers, Patricia L. Hardré, Mark A. Nanny, Hazem Refai, Chen Ling, and Janis Slater
Development of a Control System for Automating of Spiral Concentrators in Coal Preparation Plants, Josh Hoelscher, Yicheng Peter Pan, Manoj Mohanty, Jarlen Don, Tsuchin Philip Chu, and Ajay Mohan Mahajan
Dynamic Pulse Buckling of Composite Shells Subjected to External Blast, Michelle S. Hoo Fatt and Sunil G. Pothula
A Wave Propagation Model for the High Velocity Impact Response of a Composite Sandwich Panel, Michelle S. Hoo Fatt and Dushyanth Sirivolu
Dynamic Modulation for Multiplexation of Microfluidic and Nanofluidic Based Biosensors, Jun Hu and Jiang Zhe
AC Measurements and Multiplexed Detection of Microparticles Using Parallel Channel Coulter Counter, Ashish V. Jagtiani and Jiang Zhe
Frequency Division Multiplexing of a Multi-Channel Resistive Pulse Sensor, Ashish V. Jagtiani, Jiang Zhe, and Joan Carletta
A Cohesive Zone Model for Studying Crack Growth in Materials and Structures, Haodan Jiang, Xiaosheng Gao, and T. S. Srivatsan
Free and Forced Vibrations of Elastically Connected Structures, S. Graham Kelly
Slice Overlap-Detection Algorithm for Process Planning in Multiple-Material Stereolithography, Ho-Chan Kim, Jae-Won Choi, Eric MacDonald, and Ryan Wicker
Scheduling and Process Planning for Multiple Material Stereolithography, Hochan Kim, Jae-Won Choi, and Ryan Wicker
Development of a Multi-material Stereolithography System, Ho-Chan Kim, Jae-Won Choi, and Ryan B. Wicker
A Study to Evaluate and Understand the Response of Aluminum Alloy 2026 Subjected to Tensile Deformation, Daniel F. Lam, Craig C. Menzemer, and Tirumalai S. Srivatsan
The Rapid Solidification Processing of Materials: Science, Principles, Technology, Advances, and Applications, Enrique J. Lavernia and Tirumalai S. Srivatsan
Nucleation of Highly Dense Nanoscale Precipitates Based on an Innovative Process: Warm Laser Shock Peening, Yiliang Liao, Chang Ye, and Gary J. Cheng
Nucleation of Highly Dense Nanoscale Precipitates Based on Warm Laser Shock Peening, Yiliang Liao, Chang Ye, Bong Joong Kim, Sergey Suslov, Eric A. Stach, and Gary J. Cheng
Abstract A1: Impact of CYP2D6*10 and CYP3A5*3 Polymorphisms on the Pharmacokinetics of Tamoxifen in Asian Breast Cancer Patients, Joanne Siok Liu Lim, Onkar Singh, Raymond Chee Hui Ng, Nan Soon Wong, Rathi Devi Ramasamy, Ajay Mohan Mahajan, Edmund Jon Deoon Lee, and Balram Chowbay
Intelligent Real Time Data Interpretation of Rocket Test Data to Identify Sudden Transitions, Ajay Mohan Mahajan, Christopher Oesch, and Fernando Figueroa
Method for Detecting Defects in a Plastic Fuel Bank by Radiography, Ajay Paul Mahajan, John Balkcom, and Stephane Galliot
Spinal Subarachnoid Space Pressure Measurements in an in Vitro Spinal Stenosis Model: Implications on Syringomyelia Theories, Bryn A. Martin, Richard Labuda, Thomas J. Royston, John N. Oshinski, Bermans Iskandar, and Francis Loth
Numerical Simulations of the Discontinuous Progression of Cerebral Aneurysms Based on Fluid-Structure Interactions Study, Xiao-Qi Ma, Yue-She Wang, Fang-Ju Yu, and Guo-Xiang Wang
An Investigation of Strain Concentration in High-Strength Al-Zn-Mg-Cu Alloy 7085 Subjected to Tensile Deformation, C. C. Menzemer, D. F. Lam, and T. S. Srivatsan
A Study of Fatigue and Fracture Response of Cantilevered Luminaire Structures Made from Aluminum Alloy 6063, Craig C. Menzemer, Diya Azzam, and Tirumalai S. Srivatsan
CFD Modeling of Two-Stage Ignition in a Rapid Compression Machine: Assessment of Zero-Dimensional Approach, Gaurav Mittal, Mandhapati P. Raju, and Chin-Jen Sung
Adaptive Multi Airbag Shoe Insert for Diabetic Foot Care, Vidya Nandikolla, Jenna Matthews, Marco P. Schoen, Suhas Pharkute, Uwe Reischl, and Ajay Mohan Mahajan
Voltage-controlled Flow Regulating in Nanofluidic Channels with Charged Polymer Brushes, Hui Ouyang
Investigating and Understanding the Fatigue Response and Failure of Built-Up Welded Beams of a Titanium Alloy, Anil Patnaik, Narendra Poondla, Udaykar Bathini, Tirumalai S. Srivatsan, and T. Quick
Rate Theory Description of Atomic Stick-slip Friction, Danny Perez, Yalin Dong, Ashlie Martini, and Arthur F. Voter
Rate Theory Description of Atomic Stick-Slip Friction, Danny Perez, Yalin Dong, Ashlie Martini, and Arthur F. Voter